User Manual
Before Using the Handset
48
F906i_E1kou
･
A signal level icon appearing at the top of the display shows the
approximate received signal level.
･
The battery icon set by default varies by the color of FOMA terminal.
･
With FOMA terminal folded, the reception level can be confirmed on the
sub-display.
❖
Turning power OFF
1
f
(2 sec. or more)
◆
Operations to perform after turning the power ON at
the first time
When turning the power ON for the first time, operate in the order of
"AdvancedMode setting"
→
"Initial setting". The settings made can be changed
later.
･
When initialization is finished, a confirmation screen of software update
function appears. Press
g
to display the stand-by screen.
❖
AdvancedMode setting
1
"Yes" or "No" on the confirmation screen
･
When selecting "Yes", "AdvancedMode" of Kisekae Tool is set.
If you cancel the confirmation screen by pressing
c
or
f
, the
confirmation screen reappears when the power is turned ON the next time.
❖
Default setting
･
Always set Password and Request permit/deny. When
C
or
c
,
f
is
pressed before setting terminal security code or Request permit/deny, a
confirmation screen appears asking you to exit. If you exit by selecting "Yes",
this confirmation screen reappears when the power is turned ON the next time.
1
Set the required items on Initial setting screen
eC
Date & time :
Set the date and time.
→
P49
Password :
Change the terminal security code after performing
authentication.
→
P119
Fingerprint :
After performing authentication, register a fingerprint to be used
for authentication.
→
P121
Keypad sound :
Set a confirmation sound emitted when a key is pressed.
→
P100
Text size :
Set size of characters for phonebook, mail, etc.
→
P115
Request permit/deny :
Set if you provide location information after
performing authentication. To permit Location request only in a specified
period of time, make settings to Permission period of Request permit/deny.
→
P264
❖
Checking Welcome mail
The mail of "Welcome F906i " is saved by default. appears on the
stand-by display, and if folding FOMA terminal, the light (blinking in blue) and the
mail light indicate that there is an unread mail.
1
geg
The next procedures
→
P199 Step 2 and the following steps in "Displaying mail
in Inbox/Outbox"
Stand-by display
Signal level icon
Icon
Received
signal level
Strong
Out of service area or where
radio wa ves do not reach
Weak
L03.fm Page 48 Monday, November 10, 2008 4:42 PM