User Manual
Before Using the Handset
46
F906i_E1kou
❖
Charging using AC adapter or Desktop holder
Charge using optional FOMA AC adapter or Desktop Holder.
･
The battery pack cannot be charged without FOMA terminal. When charging the
battery pack, install it to FOMA terminal.
･
Also, refer to the operation manual of AC adapter or Desktop Holder.
■
Charging the battery using AC adapter only
a
Open jack cap (
a
) of FOMA terminal, hold the connector horizontally with the
arrow side upward and insert it to the jack. (
b
)
b
Unfold the power plug and insert it into a 100V AC outlet.
c
When charging is over, pull out the power plug from the outlet, and pull out
from FOMA terminal horizontally while pressing the release buttons on both
sides of the connector.
■
Using desktop holder and AC adapter in combination for charging
a
Insert the AC adapter to the desktop holder, with the arrow on the AC adapter's
connector upward.
b
Unfold the AC adapter's power plug and insert it into a 100V AC outlet.
c
Align FOMA terminal with the desktop holder's charging jack (
a
), and insert
FOMA terminal in the direction of the arrow (
b
) until it clicks.
d
When charging is over, lift and pull out FOMA terminal in the opposite direction
of the arrow of
b
while pressing the desktop holder.
✔
INFORMATION
･
When charging by placing FOMA terminal on the desktop holder, remove the sticker
of written precautions attached on the fingerprint sensor side of the terminal. And, do
not attach other stickers etc. FOMA terminal cannot be correctly placed and the
charging may not be completed if the stickers etc. are attached.
❖
Charging in a car
By using FOMA DC Adapter 01/02 (optional), charging is available in a car.
･
For details, refer to the operation manual of DC adapter.
･
When FOMA terminal is not used or you are leaving the car, disconnect the
cigarette lighter plug of the DC adapter from the cigarette lighter socket and
disconnect the DC adapter connector from FOMA terminal.
･
The fuse (2A) of the DC adapter is a consumable part. Contact your nearest
automotive supply store for a replacement.
✔
INFORMATION
･
Insertion or removal of the AC and DC adapter connectors should be done slowly and
carefully so that they are not given excessive force. When disconnecting the
connector, pull it straight while pressing the release button. Applying an excessive
force to disconnect the connector may give damage to it.
Connector
Release
button
Jack cap
External
connection
jack
AC adapter
Power plug
100V AC
outlet
AC adapter
100V AC
outlet
Power plug
Connector
Release button
Desktop holder
Charging jack
Light
b
a
L03.fm Page 46 Monday, November 10, 2008 4:42 PM