User Manual

Before Using the Handset
42
F906i_E1kou
✔ INFORMATION
･ Note that forcible installing or removing UIM, or installing battery pack with the tray
inserted at a slant may break UIM or the tray.
･ If the tray is removed, press it straight along the guide rail inside the UIM slot with
UIM left detached.
◆ Security code
Two security codes, "PIN code" and "PIN2 code", are set for UIM.
･ You can change the security codes by yourself. → P119
◆ UIM operation restriction
FOMA terminal is provided with UIM operation restriction for protecting your data/
files or data/files copyrighted by a third party.
･ When files or data are downloaded from websites or data attached to mails are
obtained to your FOMA terminal with UIM equipped, UIM operation restriction
is automatically set to these data or files.
･ With UIM replaced or no UIM installed, data or files with UIM operation
restriction set cannot be displayed or played. For i-
α ppli with UIM operation
restriction set, no functions except deletion are available.
･ Data or files with UIM operation restriction set cannot be transferred over
infrared communication/iC transmission or copied/moved to microSD card.
･ The data types subject to UIM operation restriction are as follows.
- Videophone call message, Movie memo
- i-mode mail attachment files (except ToruCa), images inserted to Deco-mail or signature,
Decome-Anime template, MessageR/F, Decome-Anime template containing data subject to
UIM operation restriction
- Screen memo
-i-
α ppli (including i- α ppli stand-by display)
- Image of ToruCa (Details)
- Images (including GIF animations, Flash graphics and images downloaded from Data
Center), i-motion, data compatible with contents transfer, melodies, PDF data, Chara-den,
Word/Excel/PowerPoint files
-Kisekae Tool
-Chaku-uta
®
/Chaku-uta full
®
- Program of Music&Video Channel
* "Chaku-uta" is a registered trademark of Sony Music Entertainment (Japan) Inc.
✔ INFORMATION
･ When data subject to UIM operation restriction is set as the stand-by display,
incoming/outgoing image, ring alert, etc., replacing UIM with another one or using
FOMA terminal without the UIM installed causes the sound and image settings to be
reset to the default state. In this case, the sound or image actually generated or
appears may be different from those set. If UIM used when downloading the data is
installed, UIM operation restriction of the data is canceled and the original settings are
restored (When data is used for Set random image, the settings may be canceled).
･ UIM operation restriction is not set to data obtained via infrared communication, iC
transmission, microSD card or DOCOMO keitai datalink or still images/movies taken
with the built-in camera.
･ The settings below are saved to UIM.
- My phone number
- SMS settings (except "SMS report request")
- DoCoMo Cert/User certificate of Manage certificate
- Select language, UIM, PLMN setting
◆ Settings when replacing UIM
If replacing the currently installed UIM with another UIM, the settings below are
changed.
Setting Changed contents
My phone number , Select language,
SMS settings (except "SMS report
request"), "DoCoMo Cert"/"User
certificate" of Manage certificate, PIN
code and PIN2 code of UIM, PIN1 code
ON/OFF, PLMN setting
Changed to the contents saved in the inserted
UIM.
i-Channel setting, Reset call cost Restored to the default settings.
Access setting of Full Browser Set to "No" regardless of the setting before
replacement.
Cookie set/delete of Full Browser Set to "Invalid" regardless of the setting
before replacement. Cookie information is
retained, but if setting to "Valid" or
"Valid(notify)" again, a confirmation screen
for deleting Cookie information appears.
Set program of Music&Video Channel The setting before replacement is canceled.
Set the program again if necessary.
L03.fm Page 42 Monday, November 10, 2008 4:42 PM