User Manual

41
Before Using the Handset
F906i_E1kou
■ Stop alarm sound by double-tapping FOMA terminal
If double-tapping (tapping twice) while alarm clock, schedule reminder or
countdown timer is sounding when FOMA terminal is folded, the sound stops.
Alarm clock stops or performs snooze operation.
■ Light alert changes
While talking or when folding FOMA terminal, if tilting FOMA terminal while the
light is on, the light changes according to the direction of tilting.
■ Flash graphics change
･ When setting Flash graphics compatible with motion sensor to stand-by display,
the image changes by moving FOMA terminal.
✔ INFORMATION
･ Depending on the spot or strength you tap, the alarm may not stop. And, note that
tapping too strongly may cause malfunction.
･ Double-tapping does not operate while walking or in the place with much vibration.
･ It may operate as double-tapping when lifting FOMA terminal with your hand.
◆ Enabling Motion sensor <Motion sensor>
1
m [Settings & NW services] 79e1 or 2
･ Even if setting to "OFF", the Flash graphics compatible with motion sensor
operate.
Using UIM (FOMA card)
UIM (FOMA card) is a card for storing user information such as phone numbers.
･ If UIM is installed incorrectly or if there is a problem with UIM, you cannot make/
receive a call or send/receive a mail.
･ For details on handling UIM, refer to the UIM manual.
◆ Installing/Removing
･ After turning the power OFF, fold FOMA terminal and hold it with your hand.
･ Take care not to touch or scratch the IC part.
･ Installing/Removing back cover and battery pack → P43
■ Installing
a Pull the tab and pull out the tray until it clicks.
b Put UIM on the tray with IC face downward, then push the tray until it stops.
■ Removing
a Perform a of installing operation.
b Take out UIM.
Tray
Tab
IC
Corner cut
UIM
L03.fm Page 41 Monday, November 10, 2008 4:42 PM