User Manual

Before Using the Handset
40
F906i_E1kou
❖ Pointing operation
Operations of pointing device and those of multi-cursor key are supported as
below.
･ When operating pointing device, do it with light touching. Scratching or giving
excessive force may damage the fingerprint sensor.
■ Slide
Keep touching the fingerprint sensor lightly, move your finger from side to side
and up and down.
■ Double-tapping
Tap the fingerprint sensor so that a ball of the finger hits the center of fingerprint
sensor lightly 2 times. For this operation, touch the fingerprint sensor with finger
as parallel as possible.
◆ Setting the effective area or sensitivity of pointing
device <Pointing device>
1
m [Settings & NW services] 78e Set the required
items eC
Use sensor for: : Set the effective area for pointing device.
･ When setting to "F-browser/i- α ppli", pointing device can be used only for
Full Browser and i-
α ppli.
･ If setting to "Not use", fingerprint sensor is available only for fingerprint
authentication.
Sensitivity : Set the sensitivity for sliding operation.
Double-tap speed : Set the sensitivity for double-tapping.
Using motion sensor
Motion sensor allows you to perform various operations by double-tapping or
tilting FOMA terminal.
Pointing device Multi-cursor key
Side key on the sub-display
menu
Slide k Side keys [ ▲▼ ]
Continue touching after sliding
k (1 sec. or
more)
ー
Double-tap gM
Touch for 1 sec. or more g (1 sec. or
more)
ー
L03.fm Page 40 Monday, November 10, 2008 4:42 PM