User Manual

19
Easy Search/Contents/Precautions
F906i_E1kou
Handling instructions
General
Keep water away from FOMA terminal.
- FOMA terminal, battery pack, adapter (including battery charger) and UIM are not
waterproof. Do not use FOMA terminal in bathrooms or other high-humidity areas, or in the
rain. When carrying FOMA terminal in a pocket near your body, sweat may corrode the
inner components, causing malfunction.
Malfunctions deemed to be caused by water are not covered by the warranty, and may be
impossible to repair. Since these conditions are outside the scope of the warranty, a repair,
if at all possible, is charged.
Clean FOMA terminal with a dry soft cloth (such as a cloth for eyeglasses).
- The display of FOMA terminal may have been applied special coating to improve clearness
of the color LCD. When cleaning FOMA terminal, rubbing it roughly with a dry cloth can
scratch the display. Take care when handling the unit, and clean it with a dry soft cloth (such
as a cloth for eyeglasses). Drops of water or dirt left on the display can cause stains or remove
the coating.
- If FOMA terminal is wiped with alcohol, paint thinner, benzine or detergent, the printing
may disappear or color may fade.
Clean the jack occasionally with a dry cotton swab.
- If the jack is dirty, the contact may become poor and the power may shut OFF. A dirty jack
can result in poor charging, so clean it with a dry cloth or cotton swab.
Do not place FOMA terminal near an air-conditioner outlet.
- The rapid change in temperature may cause condensation, causing internal corrosion and
malfunction.
When using, be careful not to subject excessive force to FOMA terminal or the
battery.
- If FOMA terminal is crammed into a brimming bag or placed in a pocket and sat on, display,
internal PCBs or battery pack may be damaged or malfunction. And, if external devices are
plugged into the external connection jack or earphone/microphone jack, the breakage of the
connector or malfunction may result.
Carefully read the separate instructions that come with FOMA terminal, adapter
(including battery charger) and desktop holder.
Do not rub or scrape the display with a metal piece etc.
- It may scratch the display, causing malfunction or damage.
FOMA terminal
Avoid extreme temperature.
- Use FOMA terminal in an ambient temperature range of between 5 and 35
, and in a
humidity range of between 45 and 85%.
FOMA terminal may affect land-line phones, TVs or radios in use nearby, so use
it as far as possible from these appliances.
Maintain a separate record of the data you saved in your FOMA terminal.
- If the data is deleted, DOCOMO assumes no responsibility for the loss of any data.
Do not plug external devices into the external connection jack or the earphone/
microphone jack at a slant, or do not pull it forcibly while it is plugged.
- May cause malfunction or damage.
Do not fold FOMA terminal with the strap held inside.
- May cause malfunction or damage.
It is normal for FOMA terminal to become warm during use or charging.
Continue to use it.
Do not leave FOMA terminal with the camera in areas under strong direct
sunlight.
- May cause discoloring or burn-in of materials.
Usually, use FOMA terminal with the earphone/microphone jack cover, external
connection jack cap and memory card slot cover placed.
-Dust and/or water brought into FOMA terminal cause troubles.
Do not use FOMA terminal with the back cover removed.
-It may cause the battery to come off, or may cause a malfunction or damage.
Do not put an extremely thick sticker etc. on the display or keypad.
- May cause malfunction.
Do not rotate the display with FOMA terminal folded.
-It may cause the display and around the keys to be scratched, causing a malfunction or
damage.
Do not give a hard shock to the fingerprint sensor and take care not to scratch
its surface.
- May not only cause the fingerprint sensor to malfunction, but also disable authentication or
pointing operation.
L02.fm Page 19 Monday, November 10, 2008 3:14 PM