User Manual
Before Using the Handset
46
F-03A_E1kou
Power ON/OFF
Turning power ON/OFF
❖
Turning power ON
1
f
(2 sec. or more)
The wake-up screen appears and the stand-by display appears. appears at
the bottom of the display while reading UIM.
･
An antenna icon appearing at the top of the display shows the approximate
received signal level.
･
The battery icon set by default varies by the color of FOMA terminal.
❖
Turning power OFF
1
f
(2 sec. or more)
◆
Operations to perform after turning the power ON at the
first time
When turning the power ON for the first time, operate in the order of "
拡大メニュー
の設定
(enlarged menu setting)"
→
"Initial setting". The settings made can be
changed later.
･
When initialization is finished, a confirmation screen of software update function
appears. Press
g
to display the stand-by screen.
❖
Enlarged menu setting
1
"Yes" or "No" on the confirmation screen
･
When selecting "Yes", "
拡大メニュー
(enlarged menu)" of Kisekae Tool is set.
If you cancel the confirmation screen by pressing
c
or
f
, the
confirmation screen reappears when the power is turned ON the next time.
❖
Default setting
･
Always set Password and Request permit/deny. When
C
or
c
,
f
is
pressed before setting terminal security code or Request permit/deny, a
confirmation screen appears asking you to exit. If you exit by selecting "Yes", this
confirmation screen reappears when the power is turned ON the next time.
･
On the stand-by display, initial setting screen is also displayed by pressing
m
[Settings & NW services]
769
.
1
Set required items on Initial setting screen
eC
Date & time :
Set the date and time.
→
P47
Password :
Change the terminal security code after performing authentication.
→
P103
Keypad sound :
Set a confirmation sound emitted when a key is pressed.
→
P86
Text size :
Set size of characters for phonebook, mail, etc.
→
P99
Request permit/deny :
After performing authentication, set if you provide
location information. To permit the location request in a specified period, set
the permission period in Request permit/deny.
→
P280
Stand-by display
Antenna icon
Received
signal level
Icon
Strong Weak
Out of service area or where
radio waves do not reach
F-03A.book Page 46 Thursday, November 20, 2008 7:57 PM