User Manual

39
Before Using the Handset
F-03A_E1kou
■ Scrolling Full Browser screen by tilting the terminal
While holding down Z on Full Browser screen, tilt FOMA terminal forward,
backward, right or left to scroll the browser screen up, down, right or left. The more
you tilt the terminal, the faster the scrolling speed becomes. For example, tilt the
terminal forward to scroll down and backward to scroll up.
･ The pointer does not move even after the screen scrolls.
✔ INFORMATION
･ While walking or in the place with much vibration, scrolling Full Browser screen by
titling FOMA terminal may not work correctly. Also, do not walk while watching a
screen because it is dangerous.
◆ Enabling Motion sensor <Motion sensor>
1
m [Settings & NW services] 78e Set required items eZ
Motion sensor ： Set whether to enable Motion sensor.
･ When "OFF" is changed to "ON", a confirmation screen for Auto rotation
setting appears. Press "Set all ON" or "Set all OFF" to set all items to "ON" or
"OFF" at once.
･ Even if setting to "OFF", Flash graphics compatible with Motion sensor set on
the stand-by display operate.
Auto rotation ： Set whether to enable Auto rotation by each functions when
Motion sensor is active. Press
m to view the description of Auto rotation of
the function at the cursor position.
Using UIM (FOMA card)
UIM (FOMA card) is a card for storing user information such as phone numbers.
･ If UIM is installed incorrectly or if there is a problem with UIM, you cannot make/
receive a call or send/receive a mail.
･ For details on handling UIM, refer to the UIM manual.
◆ Installing/Removing
･ After turning the power OFF, fold FOMA terminal and hold it with your hand.
･ Take care not to touch or scratch the IC part.
･ Attaching/Removing back cover and battery pack → P41
■ Installing
a Pull the tab and pull out the tray until it clicks.
b Hold UIM with the IC side up, align the beveled corner with the tray and push into
the tray until it stops.
■ Removing
a Perform a of installing operation.
b Take out UIM.
✔ INFORMATION
･ Note that forcible installing or removing UIM, or installing battery pack with the tray
inserted at a slant may break UIM or the tray.
･ If the tray is removed, press it straight along the guide rail inside the UIM slot with UIM
left detached.
IC
Corner cut
UIM
Tray
Tab
F-03A.book Page 39 Thursday, November 20, 2008 7:57 PM