User Manual Part 3

Before Using the Handset
48
F-02A_E1kou
✔ INFORMATION
･ When UIM is replaced, authentication is required after turning ON FOMA terminal.
When authentication succeeds, the stand-by display appears. If an incorrect terminal
security code is entered 5 times consecutively, the power is turned OFF (it can be turned
ON again).
･ If no operation is performed with something displayed on the screen, the display light
is turned off automatically according to the settings in Power saving mode. It also
applies while making a call. The display light turns on again if there is any operation or
incoming call.
Select language
Changing screen display to English
You can select language from Japanese or English (Select language).
1
m [Settings & NW services] 273e1 or 2
✔ INFORMATION
･ This setting is also saved to UIM.
･ Even if setting to "English", the displayed menu is not switched to English in some
Kisekae Tool. Note that, when Kisekae Tool in "Preinstalled" folder is set, a menu
dedicated to "English" is displayed.
･ Even if changing this setting, the title of Shortcut icon is not changed from the language
set when the shortcut icon was pasted.
Date & time
Setting date and time
You can set so that the time or time difference is automatically corrected or directly
enter the date and time. With automatic correction set, the time is corrected when
receiving the time information from DOCOMO's network in Japan or the time
difference correction information from the telecommunications carrier used
overseas.
1
m [Settings & NW services] 711e Set required
items
eC
Auto time adjust : Set whether time is corrected automatically.
･ When "ON", Offset can be set.
･ When "OFF", set the date and time. Time zone and Summer time may also be
set.
Offset : When "+", the displayed time is always set forward the specified period
of time from the corrected time. When "-", the displayed time is always set
back the specified period of time from the corrected time.
Date : The date can be entered up between January 1, 2000 and December 31,
2050.
Time : Enter the time in the 24-hour format.
Time zone : When moving to a place with time difference, set the time zone
without changing the date and time settings.
･ Time difference from the previously set time zone is calculated and displayed.
･ Set "GMT+09:00" in Japan.
F-02A.book Page 48 Friday, October 10, 2008 8:32 PM