User Manual Part 3

45
Before Using the Handset
F-02A_E1kou
❖ Charging using AC adapter or Desktop holder
Read the respective instruction manual when using the optional FOMA AC adapter,
DC adapter or Desktop Holder.
･ It is recommended that Desktop Holder be used for charging to prevent water
seepage through external connection jack.
･ The battery pack cannot be charged without FOMA terminal. When charging the
battery pack, install it to FOMA terminal.
■ Using desktop holder and AC adapter in combination for charging
a Insert the AC adapter to the desktop holder, with the arrow on the AC adapter's
connector upward.
b Unfold the AC adapter's power plug and insert it into a 100V AC outlet.
c With FOMA terminal folded, connect the charging terminal of FOMA terminal
with the charging jack of Desktop Holder (
a ), and set FOMA terminal in the
direction of the arrow (
b ) until it clicks.
d After charging is completed, hold Desktop Holder and remove FOMA terminal.
■ Charging the battery using AC adapter only
a Open jack cap ( a ) of FOMA terminal, hold the connector horizontally with the
arrow side upward and insert it to the jack. (
b )
b Unfold the power plug and insert it into a 100V AC outlet.
c When charging is over, pull out the power plug from the outlet, and pull out from
FOMA terminal horizontally while pressing the release buttons on both sides of
the connector.
AC adapter
Power plug
100V AC
outlet
Light
Charging
jack
Desktop holder
Insert at
the rear side
Release button
Connector
b
a
When pulling out the stand at the rear side of desktop holder, you can use desktop
holder standing vertically.
Using desktop holder standing vertically
Stand
Connector
Release
button
External
connection
jack
Jack cap
Power plug
100V AC
outlet
AC adapter
F-02A.book Page 45 Friday, October 10, 2008 8:32 PM