User Manual

Before Using the Handset
52
F-01A_E1kou
■ Charging the battery using AC adapter only
a Open jack cap ( a ) of FOMA terminal, hold the connector horizontally with the
arrow side upward and insert it to the jack. (
b )
b Unfold the power plug and insert it into a 100V AC outlet.
c When charging is over, pull out the power plug from the outlet, and pull out from
FOMA terminal horizontally while pressing the release buttons on both sides of
the connector.
❖ Charging in a car
By using FOMA DC Adapter 01/02 (optional), charging is available in a car.
･ For details, refer to the operation manual of DC adapter.
･ When FOMA terminal is not used or you are leaving the car, disconnect the
cigarette lighter plug of the DC adapter from the cigarette lighter socket and
disconnect the DC adapter connector from FOMA terminal.
･ The fuse (2A) of the DC adapter is a consumable part. Contact your nearest
automotive supply store for a replacement.
✔ INFORMATION
･ Insertion or removal of the AC and DC adapter connectors should be done slowly and
carefully so that they are not given excessive force. When disconnecting the connector,
pull it straight while pressing the release button. Applying an excessive force to
disconnect the connector may give damage to it.
❖ Operations and precautions for charging
When charging starts, a charge start alert sounds, light turns on and the battery icon
on the display or sub-display blinks. When charging is over, a charge completion
alert sounds, the light turns off and the battery icon stops blinking.
･ When starting the battery charging, the light turns on in red. In some
environments, the light may not light immediately when charging starts; this is
normal and not a malfunction. However, if the light does not turn on after a while,
disconnect FOMA terminal from the AC adapter, desktop holder or DC adapter
then connect it again to start charging. Contact the sales outlet such as DOCOMO
Shop if the light does not turn on for a while after charging starts.
･ If you receive a mail or shoot with the camera while charging, the light turns on
temporarily in a different color, but it turns on in red after a while.
When the light blinks while charging except for these reasons
→ P444
"Troubleshooting"
･ When installing the fully charged battery pack to FOMA terminal and connecting
it to the AC adapter, desktop holder or DC adapter, the light may turn on for a
moment and turn off. This is normal and not a malfunction.
･ During a call, communication or PushTalk session, in Silent mode or Public mode
or with Charge alert "OFF", the charge alert does not sound at start or completion
of charge.
･ If the battery icon is set with Kisekae Tool in other than "Preinstalled" folder, the
battery icon set by default blinks.
Connector
Release
button
Jack cap
External
connection
jack
AC adapter
Power plug
100V AC
outlet
F-01A.book Page 52 Tuesday, September 2, 2008 6:34 PM