User Manual

51
Before Using the Handset
F-01A_E1kou
Battery charge
For details, refer to the operation manuals for FOMA AC Adapter 01/02 (optional),
FOMA AC Adapter 01 for Global use (optional) or FOMA DC Adapter 01/02
(optional).
FOMA AC Adapter 01 is applicable only to 100V AC. Though FOMA AC Adapter
02 and FOMA AC Adapter 01 for Global use is applicable to 100-240V AC.
AC Adaptor has a plug dedicated to 100V AC (for domestic use). When using the
AC adapter in the range of AC 100V and 240V overseas, a conversion plug adapter
applicable to the country you are staying is required. Do not charge the battery
using a transformer for overseas travel.
INFORMATION
Some i-
α
ppli remains operating even when FOMA terminal is folded, consuming
power. In this case, the call, communication or stand-by time may be reduced.
During a call or communications, charging may not finish. Charging may not complete
if you start battery charging while watching/recording 1Seg, playing movie/i-motion,
obtaining Music&Video Channel program, activating Music&Video Channel player or
Music player, running i-
α
ppli. In this case, it is recommended to end the operation, and
then charge the battery.
Charging may not be completed depending on the settings of Display & Key light or in
some charging methods, for example, charging FOMA terminal in a open state with
"Always" set to Normal use in Display light time of Display & Key light. To complete
charging, it is recommended that charging be done with FOMA terminal folded.
If you use the videophone or make packet communication or 64K data communication
while charging, internal temperature of FOMA terminal may increase and the charging
may not finish normally. In this case, wait until the temperature drops and try again.
Charging using AC adapter or Desktop holder
Read the respective instruction manual when using the optional FOMA AC adapter,
DC adapter or Desktop Holder.
It is recommended that Desktop Holder be used for charging to prevent water
seepage through external connection jack.
The battery pack cannot be charged without FOMA terminal. When charging the
battery pack, install it to FOMA terminal.
FOMA terminal can be charged under any usage style.
Using desktop holder and AC adapter in combination for charging
a
Insert the AC adapter to the desktop holder, with the arrow on the AC adapter's
connector upward.
b
Unfold the AC adapter's power plug and insert it into a 100V AC outlet.
c
With FOMA terminal folded or in flip style, connect the charging terminal of
FOMA terminal with the charging jack of Desktop Holder (
a
), and set FOMA
terminal in the direction of the arrow (
b
) until it clicks.
d
After charging is completed, hold Desktop Holder and remove FOMA terminal.
b
a
AC adapter
100V AC outlet
Power plug
Connector
Release button
Desktop holder
Insert at the
back side
Charging jack
Light
Stand
When pulling out the stand at the back side of desktop holder, you can use desktop
holder standing vertically.
Using desktop holder standing vertically
F-01A.book Page 51 Tuesday, September 2, 2008 6:34 PM