User Manual
Before Using the Handset
50
F-01A_E1kou
❖
For better battery pack performance
･
Do not charge the battery for an extended period (several days) with FOMA
terminal turned ON.
After charging has completed with FOMA terminal turned ON, the power is
supplied to the terminal from the battery pack. If FOMA terminal is left in that state
for a long time, the battery pack may run out causing the low battery alert to
sound after using only a short period of time. In this case, remove FOMA terminal
from the AC adapter, desktop holder or DC adapter and then reconnect it and
charge the battery again.
･
To promote environmental conservation, return your used battery pack to NTT
DOCOMO sales outlets, our corporate agencies or the shops that collect used
battery in your community.
Charging
The battery pack does not have a full charge at time of purchase. Use AC/DC
adapter for FOMA terminal to charge the battery before using FOMA terminal.
･
To get the maximum performance from F-01A, use battery pack F10.
❖
Charging times (approximate)
The times below are the times for charging an empty battery pack with F-01A's
power switched OFF. Charging with the terminal ON or under low temperature
requires longer time.
❖
Operation time on full charge (approximate)
The times below vary by the charging method and operating environment.
･
Continuous stand-by time indicates the approximate time that the phone can
receive radio waves normally with F-01A folded. Call, communication or stand-by
time may be reduced to about half, or 1Seg watching time may be reduced due
to battery pack charging condition, function settings, operating environment such
as ambient temperature, radio wave conditions in the area of use (the radio waves
are weak or absent), etc. Call, communication or stand-by time is reduced by
performing i-mode communication. Also, even with no voice calls or i-mode
communications made, continuous call and continuous stand-by times are
reduced by making PushTalk sessions, creating i-mode mail, activating
downloaded i-appli, using i-appli stand-by display, performing data
communication or multiaccess, using camera, playing movie/i-motion, obtaining
or playing Music&Video Channel program, playing music with Music player,
activating or recording of 1Seg, connecting via Bluetooth or doing other
operations.
･
Continuous call time indicates the approximate time that the phone can send or
receive radio waves normally.
❖
Battery pack life
･
The battery pack is a consumable part. Each time it is charged, time available with
each charging reduces.
･
When a time available with each charging is reduced to about a half from that of
a new battery, replacement of the battery is recommended because it is near the
end of life. The battery pack may swell out as it comes to near the end of its
lifetime depending on the usage conditions, but it is not a problem.
･
The battery pack's life may be reduced by using i-
α
ppli or videophone or
watching 1Seg while charging.
AC adapter
Approx.
●●●
min.
DC adapter
Approx.
●●●
min.
Continuous stand-by
time
FOMA/3G
Stationary (Auto) : Approx.
●●●
H
Moving (Auto) : Approx.
●●●
H
Moving (3G static) : Approx.
●●●
H
GSM
Stationary (Auto) : Approx.
●●●
H
Continuous call time FOMA/3G
Voice call : Approx.
●●●
min.
Videophone call : Approx.
●●●
min.
GSM
Approx.
●●●
min.
1Seg watching time
Approx.
●●●
min.
(1Seg ECO mode : Approx.
●●●
min.)
F-01A.book Page 50 Tuesday, September 2, 2008 6:34 PM