Operation Manual

System expansions

Fujitsu Technology Solutions 75

Installing SmartCard reader and/or WLAN module

► Open the casing (see "Opening the casing").

► Remove the cover from the upper casing top cover if necessary (see "

Removing plastic drive

cover").

► Remove the cross-piece (see "

Removing the cross-piece").

► Remove the EMC cover if necessary (see “

Removing the EMC cover”).

► Slide the carrier into the casing in the direction of the arrow.

► Fold up the drive cage (see "

Folding up the drive cage").

► Fasten the holder with the screws (1).

► Fold down the drive cage (see "

Folding down the drive cage").

► Connect the cables.

► Replace the cross piece (see "

Installing the cross-piece").

► Close the casing (see "

Closing the casing").