Operation Manual

System expansions

64 Fujitsu Technology Solutions

Replacing the floppy disk drive

► Open the casing (see "Opening the casing").

► Remove the cross-piece (see "

Removing the cross-piece”).

► Fold up the drive cage (see "

Folding up and down the drive cage").

Removing the floppy disk drive

► Remove the screws (1).

► Disconnect the cables from the floppy disk drive.

► Fold down the drive cage (see "

Folding down the drive cage").

► Pull the drive out of the casing in the direction of the arrow (2).

► If you do not install another diskette drive or hard drive, install the EMC cover (see “

Installing

the EMC cover”).