Operation Manual

System expansions

52 Fujitsu Technology Solutions

Removing an optional port

► Open the casing (see "Opening the casing").

► Disconnect the cable from the connector on the mainboard.

► Press on the locking lever in the direction of the arrow (1), unhook it and swing it up in the

direction of the arrow (2).

► Remove the port from the slot (3).

For cooling, protection against fire, and in order to comply with EMC (electromagnetic

compatibility) regulations, you must refit the cover plate.

► Push the rear slot cover plate into the slot (4). Ensure that the point of the cover engages on

the outside of the casing.

► Fold the lock closed in the direction of the arrow (5) and allow it to engage.

► Close the casing (see "

Closing the casing").