Operation Manual

System expansions
44 Fujitsu Technology Solutions
Removing board from low-profile slot
► Open the casing (see "Opening the casing").
► Disconnect the cables connected to the board.
2
3
1
4
5
► Press on the locking lever in the direction of the arrow (1), unhook it and swing it up in the
direction of the arrow (2).
► Pull the board out of the slot (3).
!
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regulations, you must refit the cover plate.
► Push the rear slot cover plate into the slot (4). Ensure that the point of the cover engages on
the outside of the casing.
► Fold the lock closed in the direction of the arrow (5) and allow it to engage.
► Close the casing (see "
Closing the casing").
i
If you have installed or removed a PCI board, please check the relevant PCI slot settings
in the BIOS Setup. If necessary, change the settings. Further information is provided in the
PCI board documentation.