Operation Manual

System expansions
Fujitsu Technology Solutions 39
Closing the casing
a
2
3
1
2
1
► Place the top cover on the casing base (1) so that the distance (a) is approximately 2 cm.
Ensure that the top cover of the casing engages in the guide rails in the lower part of the
casing.
► Push the top cover in the direction of the arrow (2) until it engages.
On devices with main power switch
► Turn the key in the direction of the arrow to lock the casing again.
► Return the system unit to its original position.
► Reconnect the cables that you disconnected before.