Operation Manual

Troubleshooting and tips
Fujitsu Technology Solutions 33
The screen stays blank
If your screen remains blank this may be due to the following:
Monitor is switched off
► Switch your monitor on.
Power saving has been activated (screen is blank)
► Press any key on the keyboard.
or
► Deactivate the screen saver. If necessary, enter the appropriate password.
Brightness control is set to dark
► Adjust the brightness control. For detailed information, please refer to the operating manual
supplied with your monitor.
Power cable not connected
► Switch off the monitor and the device.
► Check that the monitor power cable is properly connected to the monitor and to a grounded
mains outlet or to the monitor socket of the device.
► Check that the device power cable is properly plugged into the device and a grounded mains
outlet.
► Switch on the monitor and the device.
Monitor cable not connected
► Switch off the monitor and the device.
► Check that the monitor cable is properly connected to the device and monitor.
► Switch on the monitor and the device.