Operation Manual

Preparing for use
Fujitsu Technology Solutions 19
Switching on the monitor and device
► Switch on the monitor (refer to the operating manual for the monitor).
► Switch the device on. To do this, follow the instructions below.
i
Depending on the version, the device may be equipped with a main power switch on the
back of the device in addition to the ON/OFF button on the front. As a result, there are
different ways to switch on the two variants.
Consequently, the illustrations shown below may differ slightly from your actual model.
Switching on the device (with the main power switch)
0
1
I
0 = device is switched off
I = device is ready
► Switch on the device via the main power switch (1) on the back of the device.