Operation Manual

Preparing for use
12 Fujitsu Technology Solutions
Connecting the monitor
i
Depending on the device configuration level, the monitor ports of the mainboard (1) may
be covered and without function. In this case, only use the external monitor ports of the
display adapters in one of the module slots (2).
4
3
1
2
1 = Monitor ports of the mainboard 2 = External monitor ports of the display
adapter
► Follow the instructions contained in the monitor manual to prepare the monitor for operation
(e.g. connecting cables).
► Connect the data cable to a suitable monitor port of the device (VGA, DVI-I, DisplayPort).
► Depending on your device configuration level and connector, plug the monitor power cable into
either the monitor socket of the device (3) or an earthed mains outlet (4).
i
When you connect the monitor to the monitor socket of the device, it automatically
switches off as soon as the device switches off.
!
The monitor power cable may only be connected to the monitor socket of the device if the
monitor current consumption is smaller than 1.5 A with 230 V or 3 A with 115 V. The
values for the monitor current consumption can be found in the technical data on the
monitor or in the operating manual for the monitor.