Operation Manual

Getting started
Ports on t he device
Interf acesExternaldevices,Device,
The ports are located on the front and back of the device. The ports available o n your
device depend on the configuration level you have selected . The standard ports are
marked with the symbo ls shown below (or similar). Detailed information on the location
of the ports is provided in the m anua l for the m a inboard.
Serial interface, turquoise
Serialinterface
Microphone port, pink
Microphonepo rt
VGA monitor port, blue
Monitorport
Audio input (Line In), light blue
AudioinputLinein
Headphones port, orange or
light gree n
Headphones
Audio output (Line Out), light green
AudiooutputLineout
USB - Universal Serial Bus,
black
UniversalSerialB
us
LAN
LAN port
LANport
PS/2 mouse port, green
MouseportPS/2mouseport
PS/2 keyboard port, purple
Keyboardport
Some o f the connected devices require special drivers (see t he
documentation for the connected device).
Connecting a monitor
► Follow the instructions contained in the monitor manual to prepare the monitor
for operation (e.g. connecting cables).
Monitor
► Connect the da ta cable of the monitor into the monitor port of your device.
The monitor power cable may only be connected to the m onitor socket of the
device if the monitor rated current is less than 1.5 A with 230 V or 3 A with
115 V. The values for the monitor rated current can be found in the technical
data on the monitor or in the operating ma nual for the monitor.
► Depending on the configuration level of your device, plug the monitor power
cable into the grounded mains outlet.
Fujitsu Technology Solutions 17