Operation Manual

System expansions
Installing and removing a WLAN module (optional)
WLANmod ule
Operation of this module is not permitted in Ta iwan.
You can also install a WLAN module for wireless LAN (Local Area Network)
in the bay of the folded-open drive cage.
Installing the WLAN module
► O pen the casing (see "Opening the casing", Page 34).
► Remove the drive cage (see "
Removing the drive cage", Page 37).
2
2
1
► Slide the WLAN module carefully into th e designated bay (1) and secure it with the two screws (2).
Make sure that you do not scratch the antenna on the front opening of the drive ca ge.
► C onnect th
eUSBcabletotheWLANmodule.
► C onnect the USB cable of the WLAN module onto the corresponding conne ctor
on the mainboard. Refer to the manual for the ma inboard.
► Install t
he drive cage again (see "
Installing the drive cage", Page 38).
► Close the casing (see "
Closing the casing" , Page 35).
Details on using Wireless LAN can be foun d in the online help system
included with the Wireless LAN software.
46 Fujitsu