Operation Manual

System expansio ns
Installing an accessible drive
► Open the casing (see "Opening the casing", Page 34).
Do not throw away t he covers. If you remove the drive again, you m ust reinstall the
covers (cool ing, fire protection or EMC regulations to be complied with).
You must only use the screws recommended by the man ufacturer. Long scre ws
could damage the drive or prevent it from working properly.
EMC,electrom agneticcompatibi l ity
► If necessary, remove the plastic drive cover (see "Removing the plastic drive cover", Page 36).
► Remove the d rive cage (se
e "
Removing the drive ca ge", Pa ge 37).
2
2
2
1
► Slide the n ew drive as far as it will go
into th e drive cage (1).
► Fasten the screws (2).
► Install the drive cage again (see "
Installing
the drive cage", Page 38).
► Con nect the connect
or for the data and
power cables to the d
rive.
► Close the casing (see "
Closing the casing" , Page 35).
It may be necessary to modify the entry for the drive in the BIOS Se tup accordingly.
Fujitsu 39