Operation Manual

System expansio ns
Installing the plastic drive cover
Depending on the drive, e.g. if you wish to remove the accessible drive, you may
need to refit the plastic d rive cover again afterwards.
► Insert the drive cover in the direction
of the arro w into the front panel
and press the latches lightly into the
corresponding brackets.
► Close the casing (see "
Closing the
casing", Page 35).
Installing and removing the drive cage
Removing the d
rive cage
Drivecage
► Open the casing (see "Opening the casing", Page 34).
1
2
► Fold up the dri
ve cage at an angle (1).
► If a drive is present, disconnect the
connector of the data and powe r supply
cables from the drive (2).
► Ta ke o ut t h
e drive c age from the
casing mou
nts.
Fujitsu 37