Operation Manual

Getting started
Ports on the device
PortsExternaldevicesDevi ce
The ports are located on the front and ba ck of the device. The ports available on your
device depe nd on the config uration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the ma inboard.
PS/2 keyboard port, purple
Keyboa rdport
Parallel po rt/printer (optional)
ParallelportPrinter
1
Serial port 1, turquoise
Serialport
2
Serial port 2, turquoise
Serialport
VGA monitor connection, blue
Monitorport
Microphone jack, pink
Microphone jack
Headphones jack, light green
Headphones
Audio input (Line in), light blue
AudioinputLinein
Audio output (L ine out), light
green
AudiooutputLineout
PS/2 mouse port, green
MouseportPS/2mouseport
USB 2.0 - U niversal Serial Bus,
black
UniversalSerialBus
USB 3.0 - U niversal Serial Bus,
blue
LAN
LAN port
LANport
DVI-I monitor port DP DisplayPort
Some of the connected devices require special software (e.g. drivers) (refer to the
documentation for the connected device a nd operating system).
Connecting a monitor
► Follow the instructions contained in the monitor manual to prepare the
monitor for use (e.g. connect the cables).
Monitor
► Plug the data cable into the monitor port on the device.
Depending on the configuration level of you r device an d your monitor, you can
connect the data cable either to the DVI interface or to the DisplayPort.
► Plug the monitor power cable into a grounded mains outlet.
Fujitsu 17