Operation Manual

Getting started
Connecting external devices
Read the documentation o n the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not co nnect or disconnect cables during a thunderstorm.
Always take hold of the act ual plug. Never unplug a cab le by pulling the cable itself.
Connect and disconnect the cables in the order d escribed below.
Connecting the cables
► Turn off all power and equipm ent switches.
CordCable,
► Remove all power plugs from the grounded mains outlets.
► Connect all the cables to the device and the external d evices. Please make sure that you
always observe the safety notes provided in "
Important notes", Page 7.
► Plug all data communication cables into the appropriate sockets.
► Plug all power cables into the grounded mains outlets.
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in "
Connecting external devices to the USB
ports", Page 19 and in the documentation for the USB devices.
Disconnecting the cables
► Sw itch off al
l affected devices.
Cable,
► Remove all power plugs from the grounded mains outlets.
► Unplug all d
ata communication cables from the approp riate sockets.
► Disconnect all of th e cables from the device and from the external devices.
16 Fujitsu