Operation Manual

Getting started
Operating position
You can use the device in a vert ical or horizontal operating position.
Vertical operating position
(optional)
Operation in the vertical operating position i s not allowed in Taiwan.
Proceed as follows to operate the device in the vertical operating position:
Verticaloperatingpo
sition
Operatingposition, v
ertical
Rubber/plasticfeetSideco ver
► Disconnect the cables if required.
► Pull off the foil from the rubber/plastic feet included in the pack of accessories.
► Stick the rubber/plastic feet to the underside of the casing. In order to ensure a
that the unit is stable, the rubber/plastic feet should be located in app roximately
the positions shown in the illustration.
► Place the device vertically on the rubber/plastic feet.
► If necessary, reconnect any cables that were previously disconnected.
Fujitsu 13