Operation Manual

Getting s tarted
Connecting external devices
Read the documen tation on the external device before connecting it.
With th e exception of USB devices, always remove all power plugs
before connecting externa l devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.
Connect and disconnect the cables in the order described below.
Connecting the cables
► Turn off all power and equipment switches.
CordCable,
► R emove all power plugs from the grounded mains outlets.
► C onnect all the cables to the device and the external devices. Please make sure that you
always observe the safety notes provided in "
Important notes", Page 3 .
► Plug all data communication cables into the appropriate sockets.
► Plug all power cables into the grounded mains outlets.
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in "
Connecting external devices to the USB
ports", Page 13 and in the documentation for the USB devices.
Disconnecting t he cables
► Sw itch off all affected devices
.
Cable,
► R emove all power plugs from the grounded mains outlets.
► U nplug all data communication cabl
es from th e appropriate sockets.
► D isconnect all o f the cables from the device and from the external devices.
10 A26361-K1002-Z220-1-7619, edition 2