Operation Manual

Important notes
Transporting the device
Device,Transporta tionRetransportation
Transport all p a rts separately in their original packaging or in a packaging w h ich
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it will be used,
condensation may occur. Before ope rating the device, wait until it is absolutely dry
and has reached approximately the same temperature as the installation site.
Cleaning the device
Device,Transporta tionRetransportationSystemunit, seeDevic
e
Turn off all power and equipm ent switches and disconnect the pow er
plug from the mains outlet.
Do not clean any interior parts yourself, l eave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic (alcohol, thinner or acetone).
Never clean the device with wa ter! Water enterin g into the device could
present a serious risk to users (e.g. electric shock).
Ensure that no liquid enters the system.
The surface can be
cleaned with a dry cloth. If particularly dirty, use a cloth tha t has been
moistened in mil
d domestic deterge nt and then carefu lly wrung out.
Use disinfecta
nt wipes to clean the keyboard and the mouse.
12 Fujitsu