User's Manual

Troubleshooting and tips
The wireless connection to a network does not work
The battery discharges too quickly
The printer does not print
Cause
Troubleshooting
The printer is not switched on.
► Make sure that the printer is switched
on and ready for operation (refer to the
documentation s
upplied with the printer).
The printer is not connected correctly.
► Check that the data cable between the Tablet
PC and the printer is properly connected.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
► Check that the data cable between the Tablet
PC and the printer is properly connected.
► Check whether the correct printer driver is
loaded (re
fer to the printer documentation).
Cause
Troubleshooting
The wireless component is switched off.
► Switch the wireless component on (see
"Switching the wireless components on and
off", Page 43).
The wireless component is switched on. Despite
this, the wireless connection to a network does
not work.
► Check whether the wireless connection is
enabled by the software.
► Further information on using the wireless
component can be
found in the help files.
Cause
Troubleshooting
The battery is either too hot or too cold. In this
case the battery indicator flashes.
► Bring the Tablet PC up/down to a normal
operating temperature again.
► If the operating time of the battery life is
extremely s
hort, the battery is probably too
old. R
eplace the battery if necessary.
You may have an application running that
consumes a great deal of power due to frequent
accessing of the hard disk or optical drive.
► Use the AC adapter whenever possible.
The maximum brightness may have been set
for the screen.
► Reduce the brightness of the screen to
lower energy consumption: You will find the
setting under C
ontrol Panel – Hardware and
Sounds – W
indows Mobility Center.
80 Fujitsu