User's Manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q665
- Contents
- Declarations of conformity 7
- Fujitsu Contact Information 8
- Ports and controls 10
- Important notes 14
- First-time setup of your device 19
- Working with the Tablet PC 23
- Settings in BIOS Setup Utility 72
- Troubleshooting and tips 75
- Technical data 85
- Manufacturer’s notes 91
- Declarations of conformity 94
- FCC and IC Regulatory Information 95
- Appendix 99
- Index 114
- Fujitsu Shopping Online
- Maintaining Latest Configuration
- Limited Warranty
- Ports and controls
- Front (figure does not show the water-resistant device variant)
- Right side (top - water-resistant device variant, bottom - non water-resistant device variant)
- Additional safety notes for devices with wireless components
- Protecting the display screen
- Energy saving
- Traveling with your Tablet PC
- Waterproof/dustproof (device-dependent)
- Cleaning the Tablet PC
- Cleaning with disinfectant wipes
- Unpacking and checking the device
- Choose a location
- Connecting the AC adapter
- Switching on the device for the first time
- Switching the Tablet PC on
- Switching the Tablet PC off
- Handwriting recognition
- Touchscreen
- Select display orientation (portrait or landscape format)
- Using fingers
- Using the stylus
- Tablet buttons
- Webcam
- Rechargeable battery
- Using the energy saving functions
- Memory cards
- SIM card
- Ethernet and LAN (only with performance docking cradle)
- GPS
- Your performance docking cradle (optional)
- Keyboard docking station (optional)
- Intermediary VESA Mount Plate (optional)
- Hand strap (optional)
- Security functions
- Configuring the fingerprint sensor
- Using the Security Lock
- SmartCard reader (optional)
- Trusted Platform Module - TPM (device dependent)
- Connecting an external monitor
- Connecting USB devices
- Connecting external audio devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- BIOS Setup Utility operation
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
- Load Setup Defaults – load default values
- Discard Changes - Discard Changes without exiting BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save changes and power off
- Executing a reset
- Help if problems occur
- Recovering your Factory Image
- The Tablet PC’s date or time is incorrect
- The printer does not print
- Acoustic warning
- WLAN specifications
- Rechargeable battery
- Keyboard docking station (optional)
- Cover (optional)
- DOC (Industry CANADA) Notices
- ENERGY STAR Compliance
Security functions
Activating hard disk protection
► Call up the BIOS Setup and select the Security menu.
4
If you have not assigned BIOS passwords yet, define the supervisor and the user
password no
w, if desired (see "Security functions", Page 60).
► Mark the Hard Disk Security field and press the Enter key.
► In the area Drive0, mark the field Set Master Password and press the Enter key.
4
Enter new Password then appears and you are asked to enter a password.
► Enter the password and press the Enter key.
4
Confirm new Password requires you to confirm the password.
► Enter the password again and press the Enter key.
4
With Setup Notice: Changes have been saved you receive confirmation that
the new pas
sword has been saved.
The field Password Entry on Boot is set to Enabled by default. You can exit the BIOS
Setup once you have finished changing the settings.
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key and select Yes.
4
The Tablet PC reboots and your hard disk is now protected with a password. The
password prompt is enabled as soon as the Tablet PC has rebooted.
Deactivating hard disk protection
To cancel a password (without setting a new password) proceed as follows:
► Ca
ll up the BIOS Setup and select the Security menu.
► Mark the Hard Disk Security field and press the Enter key.
► In the area Drive0, mark the field Set Master Password and press the Enter key.
4
With the prompt Enter current Password you are first asked to enter the old password again.
With E
nter new Password you are then prompted to enter a new password.
► After the request, press the Enter key three times.
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key and select Yes.
4
The Tablet PC reboots and there is no longer any password protection for this hard disk.
SmartCard reader (optional)
Your device may be fitted with a SmartCard reader depending on your chosen model
(only available in models with screw holes and SmartCard reader).
SmartCards are not supplied as standard equipment. You can use all SmartCards that comply with
the ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers.
With the appropriate software you can use your SmartCard as an alternative to password protection,
but also as a digital signature, for encrypting your e-mails or for home banking.
Fujitsu 65