User's Manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q665
- Contents
- Declarations of conformity 7
- Fujitsu Contact Information 8
- Ports and controls 10
- Important notes 14
- First-time setup of your device 19
- Working with the Tablet PC 23
- Settings in BIOS Setup Utility 72
- Troubleshooting and tips 75
- Technical data 85
- Manufacturer’s notes 91
- Declarations of conformity 94
- FCC and IC Regulatory Information 95
- Appendix 99
- Index 114
- Fujitsu Shopping Online
- Maintaining Latest Configuration
- Limited Warranty
- Ports and controls
- Front (figure does not show the water-resistant device variant)
- Right side (top - water-resistant device variant, bottom - non water-resistant device variant)
- Additional safety notes for devices with wireless components
- Protecting the display screen
- Energy saving
- Traveling with your Tablet PC
- Waterproof/dustproof (device-dependent)
- Cleaning the Tablet PC
- Cleaning with disinfectant wipes
- Unpacking and checking the device
- Choose a location
- Connecting the AC adapter
- Switching on the device for the first time
- Switching the Tablet PC on
- Switching the Tablet PC off
- Handwriting recognition
- Touchscreen
- Select display orientation (portrait or landscape format)
- Using fingers
- Using the stylus
- Tablet buttons
- Webcam
- Rechargeable battery
- Using the energy saving functions
- Memory cards
- SIM card
- Ethernet and LAN (only with performance docking cradle)
- GPS
- Your performance docking cradle (optional)
- Keyboard docking station (optional)
- Intermediary VESA Mount Plate (optional)
- Hand strap (optional)
- Security functions
- Configuring the fingerprint sensor
- Using the Security Lock
- SmartCard reader (optional)
- Trusted Platform Module - TPM (device dependent)
- Connecting an external monitor
- Connecting USB devices
- Connecting external audio devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- BIOS Setup Utility operation
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
- Load Setup Defaults – load default values
- Discard Changes - Discard Changes without exiting BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save changes and power off
- Executing a reset
- Help if problems occur
- Recovering your Factory Image
- The Tablet PC’s date or time is incorrect
- The printer does not print
- Acoustic warning
- WLAN specifications
- Rechargeable battery
- Keyboard docking station (optional)
- Cover (optional)
- DOC (Industry CANADA) Notices
- ENERGY STAR Compliance
Working with the Tablet PC
SIM card
A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a cellular phone or Tablet
PC and, together with an integrated 4G module, enables access to a cellular radio network.
Follow the instructions supplied by the provider of the SIM card. If you do not feel the
the SIM card engage as you insert it, use a pointed object to insert the SIM card.
Please note that the SIM card format must be micro-SIM (3FF). Other SIM
card formats, such as full-size (1FF), mini-SIM (2FF) or nano-SIM (4FF) do
not fit in the SIM card slot of your Tablet PC.
Please do not insert any other format of SIM card as they may become
twisted, they could even damage the system.
Inserting a SIM card
a
2
1
►
►
Open the slot
cover (1).
►
Carefully push the SIM card into the slot (a) in the direction of the arrow (2) until you
feel
the SIM card engage. The label area must be facing upward. Do not apply any
force,
otherwise the delicate contact surfaces could be damaged.
Close the slot cover.
42 Fujitsu