User's Manual

First-time setup of your device
Choose a location
Choose a suitable location for the device before setting it up. In doing
so, please follow these instructions:
• Never place the device or the AC adapter on a heat-sensitive surface.
The surface c
ould be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This c
an result in damage caused by overheating.
• The back of the device heats up during normal operation. Prolonged contact
with skin c
an become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of t
he device may mark certain types of delicate surfaces.
• Keep other objects at least 100 mm / 4 inches away from the device
and its AC adap
ter to ensure adequate ventilation.
• Do not expose the device to extreme environmental conditions. Protect
the device agai
nst dust, humidity and heat.
Connecting the AC adapter
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The supplied AC cable conforms to the requirements of the country in which
you purchased your device. Make sure that the AC cable is approved for
use in the country in which you intend to use it.
► Connect the AC cable (1) to the AC adapter.
► Plug the AC cable (2) into a power outlet.
► Connect the AC adapter cable (3) to the
DC jack (
DC IN) of the device.
3
2
1
20 Fujitsu