User's Manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q665
- Contents
- Declarations of conformity 7
- Fujitsu Contact Information 8
- Ports and controls 10
- Important notes 14
- First-time setup of your device 19
- Working with the Tablet PC 23
- Settings in BIOS Setup Utility 72
- Troubleshooting and tips 75
- Technical data 85
- Manufacturer’s notes 91
- Declarations of conformity 94
- FCC and IC Regulatory Information 95
- Appendix 99
- Index 114
- Fujitsu Shopping Online
- Maintaining Latest Configuration
- Limited Warranty
- Ports and controls
- Front (figure does not show the water-resistant device variant)
- Right side (top - water-resistant device variant, bottom - non water-resistant device variant)
- Additional safety notes for devices with wireless components
- Protecting the display screen
- Energy saving
- Traveling with your Tablet PC
- Waterproof/dustproof (device-dependent)
- Cleaning the Tablet PC
- Cleaning with disinfectant wipes
- Unpacking and checking the device
- Choose a location
- Connecting the AC adapter
- Switching on the device for the first time
- Switching the Tablet PC on
- Switching the Tablet PC off
- Handwriting recognition
- Touchscreen
- Select display orientation (portrait or landscape format)
- Using fingers
- Using the stylus
- Tablet buttons
- Webcam
- Rechargeable battery
- Using the energy saving functions
- Memory cards
- SIM card
- Ethernet and LAN (only with performance docking cradle)
- GPS
- Your performance docking cradle (optional)
- Keyboard docking station (optional)
- Intermediary VESA Mount Plate (optional)
- Hand strap (optional)
- Security functions
- Configuring the fingerprint sensor
- Using the Security Lock
- SmartCard reader (optional)
- Trusted Platform Module - TPM (device dependent)
- Connecting an external monitor
- Connecting USB devices
- Connecting external audio devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- BIOS Setup Utility operation
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
- Load Setup Defaults – load default values
- Discard Changes - Discard Changes without exiting BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save changes and power off
- Executing a reset
- Help if problems occur
- Recovering your Factory Image
- The Tablet PC’s date or time is incorrect
- The printer does not print
- Acoustic warning
- WLAN specifications
- Rechargeable battery
- Keyboard docking station (optional)
- Cover (optional)
- DOC (Industry CANADA) Notices
- ENERGY STAR Compliance
Important notes
Transporting the Tablet PC
Protect the Tablet PC from severe shocks and extreme temperatures
(e.g. direct sunlight in a car).
•
Do not transport your Tablet PC while it is turned on.
•
Carry your Tablet PC with you while traveling. Do not check it in as baggage.
•
Never put your Tablet PC through a metal detector. Have it hand-inspected by
security per
sonnel. You can however put your Tablet PC through a properly
tuned X-ra
y machine. To avoid problems, place it close to the entrance of
the m
achine and remove it as soon as possible or have it hand-inspected by
security per
sonnel. Security officials may require you to turn your Tablet PC
on. So m
ake sure you have a charged battery on hand for this.
► Switch the Tablet PC off.
► Unplug the AC plug of the AC adapter and all external devices from the power outlets.
► Disconnect the AC adapter cable and the data cables for all external devices.
► To protect against damaging jolts and bumps, use a suitable Tablet PC
carrying c
ase to transport your Tablet PC.
Waterproof/dustproof (device-dependent)
Protection class IPX5 stipulates that the tablet can be operated normally after it has been sprayed
with water for at least 3 minutes through an opening of 6.3 mm / 0.25 inches diameter and with a
flow rate of 12.5 liters of water per minute from a distance of about 3 meters / 118.11 inches.
Protection class IPX8 stipulates for your Tablet PC that it can be operated normally
after it has been submerged in tap water at room temperature for 30 minutes
and to a depth of 1.50 meters / 59.05 inches.
Furthermore, protection class IP5X stipulates that the Tablet PC can be left in an environment with
dust particles of up to 75 μm diameter for 8 hours and can then still be operated safely.
To be certain that the device remains waterproof and dustproof, the covers of the ports
and the cover of the DC jack socket (DC IN) must always remain closed. Chapters "SIM
card", Page 42 and "Memory cards", Page 40 describe how ports can be opened and
securely sealed again. Otherwise, water can enter the Tablet PC and cause a malfunction.
Make certain that water in the area of the headphone and microphone socket is wiped
away immediately, otherwise a malfunction or electric shock could occur.
If the Tablet PC comes into contact with salt water, soft drinks or
mud, it must be washed off immediately.
Fujitsu 17