User's Manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q665
- Contents
- Declarations of conformity 7
- Fujitsu Contact Information 8
- Ports and controls 10
- Important notes 14
- First-time setup of your device 19
- Working with the Tablet PC 23
- Settings in BIOS Setup Utility 72
- Troubleshooting and tips 75
- Technical data 85
- Manufacturer’s notes 91
- Declarations of conformity 94
- FCC and IC Regulatory Information 95
- Appendix 99
- Index 114
- Fujitsu Shopping Online
- Maintaining Latest Configuration
- Limited Warranty
- Ports and controls
- Front (figure does not show the water-resistant device variant)
- Right side (top - water-resistant device variant, bottom - non water-resistant device variant)
- Additional safety notes for devices with wireless components
- Protecting the display screen
- Energy saving
- Traveling with your Tablet PC
- Waterproof/dustproof (device-dependent)
- Cleaning the Tablet PC
- Cleaning with disinfectant wipes
- Unpacking and checking the device
- Choose a location
- Connecting the AC adapter
- Switching on the device for the first time
- Switching the Tablet PC on
- Switching the Tablet PC off
- Handwriting recognition
- Touchscreen
- Select display orientation (portrait or landscape format)
- Using fingers
- Using the stylus
- Tablet buttons
- Webcam
- Rechargeable battery
- Using the energy saving functions
- Memory cards
- SIM card
- Ethernet and LAN (only with performance docking cradle)
- GPS
- Your performance docking cradle (optional)
- Keyboard docking station (optional)
- Intermediary VESA Mount Plate (optional)
- Hand strap (optional)
- Security functions
- Configuring the fingerprint sensor
- Using the Security Lock
- SmartCard reader (optional)
- Trusted Platform Module - TPM (device dependent)
- Connecting an external monitor
- Connecting USB devices
- Connecting external audio devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- BIOS Setup Utility operation
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
- Load Setup Defaults – load default values
- Discard Changes - Discard Changes without exiting BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save changes and power off
- Executing a reset
- Help if problems occur
- Recovering your Factory Image
- The Tablet PC’s date or time is incorrect
- The printer does not print
- Acoustic warning
- WLAN specifications
- Rechargeable battery
- Keyboard docking station (optional)
- Cover (optional)
- DOC (Industry CANADA) Notices
- ENERGY STAR Compliance
Appendix
Auto-installation support for essential access software
from backup location
The below listed steps are applicable in cases in which a backup copy was created as
mentioned in the section “Creating a Backup of essential access software”.
1.
It is important to have the extracted Auto installer software package folder
and R
eadme file in the same location as other software folders. Otherwise
auto-i
nstallation of the software will not be supported.
2.
Inside the Auto Installer software package, launch FjAutoinstall.exe as an Administrator.
3.
Click Yes on the User Account Control dialog box. This will take some time to
process t
he software packages. A message will be displayed during this time stating,
“Please wa
it while the content is being processed”.
4.
If EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue.
5.
The Fujitsu Software Auto Installer user interface will be launched providing ability
to a
uto install the essential access software on the system.
6.
It is recommended that you install all the software in the listed order. You can
“Select A
ll”, to install the software in the order listed.
7.
Click the Install button to start the installation.
8.
After installing all the selected drivers, Installation Results window is be displayed. Click OK.
9.
“You must restart the system for the settings to take effect. Do you wish to
reboot now
?” message appears. Select Yes.
10.
The system will now reboot.
Auto Installation support for the software downloaded from support website
1.
Download FSDM (Fujitsu Software Download Manager) from the support site and download all
the d
rivers applicable to the model and OS using FSDM if they are not downloaded yet.
2.
When the software packages are downloaded from web, it is important to download
the A
uto Installer Software package and the model/language- specific Readme
file if y
ou prefer to auto install the software.
3.
It is important to have the extracted Auto Installer software package folder
and R
eadme file in the same location as other software folders. Otherwise
auto-i
nstallation of the software will not be supported.
4.
Inside the Auto Installer software package, launch FjAutoinstall.exe as administrator.
5.
Click Yes on the User Account Control dialog box. This will take some time to
process t
he software packages. A message will be displayed during this time stating
“Please wa
it while the content is being processed”.
6.
If EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue.
7.
The Fujitsu Software Auto Installer user interface will be launched providing the ability
to aut
o install the software downloaded from support site.
8.
It is recommended that you install all the software in the listed order. You can
Select All, to install the software in the order listed.
9.
Click the Install button to start the installation.
10.
After installing all the selected drivers, the Installation Results window is displayed. Click OK.
11.
“You must restart the system for the settings to take effect. Do you wish to
reboot now
?” message appears. Select Yes.
12.
The system will now reboot.
112 Fujitsu