User's Manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q665
- Contents
- Declarations of conformity 7
- Fujitsu Contact Information 8
- Ports and controls 10
- Important notes 14
- First-time setup of your device 19
- Working with the Tablet PC 23
- Settings in BIOS Setup Utility 72
- Troubleshooting and tips 75
- Technical data 85
- Manufacturer’s notes 91
- Declarations of conformity 94
- FCC and IC Regulatory Information 95
- Appendix 99
- Index 114
- Fujitsu Shopping Online
- Maintaining Latest Configuration
- Limited Warranty
- Ports and controls
- Front (figure does not show the water-resistant device variant)
- Right side (top - water-resistant device variant, bottom - non water-resistant device variant)
- Additional safety notes for devices with wireless components
- Protecting the display screen
- Energy saving
- Traveling with your Tablet PC
- Waterproof/dustproof (device-dependent)
- Cleaning the Tablet PC
- Cleaning with disinfectant wipes
- Unpacking and checking the device
- Choose a location
- Connecting the AC adapter
- Switching on the device for the first time
- Switching the Tablet PC on
- Switching the Tablet PC off
- Handwriting recognition
- Touchscreen
- Select display orientation (portrait or landscape format)
- Using fingers
- Using the stylus
- Tablet buttons
- Webcam
- Rechargeable battery
- Using the energy saving functions
- Memory cards
- SIM card
- Ethernet and LAN (only with performance docking cradle)
- GPS
- Your performance docking cradle (optional)
- Keyboard docking station (optional)
- Intermediary VESA Mount Plate (optional)
- Hand strap (optional)
- Security functions
- Configuring the fingerprint sensor
- Using the Security Lock
- SmartCard reader (optional)
- Trusted Platform Module - TPM (device dependent)
- Connecting an external monitor
- Connecting USB devices
- Connecting external audio devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- BIOS Setup Utility operation
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
- Load Setup Defaults – load default values
- Discard Changes - Discard Changes without exiting BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save changes and power off
- Executing a reset
- Help if problems occur
- Recovering your Factory Image
- The Tablet PC’s date or time is incorrect
- The printer does not print
- Acoustic warning
- WLAN specifications
- Rechargeable battery
- Keyboard docking station (optional)
- Cover (optional)
- DOC (Industry CANADA) Notices
- ENERGY STAR Compliance
Appendix
Recovering Your Recovery Image Using Recovery and Utility
(for new hard drive or non-bootable hard drive)
If you have installed a new hard drive or your hard drive is not bootable, perform the following steps.
Note: You will need the Bootable disk and Recovery Image disk set for this recovery.
1.
Power on your system. When the Fujitsu logo appears on the screen, press the
2.
Insert the bootable disk in your DVD drive, then click OK.
3.
Highlight the CD/DVD option from the Boot Menu and press
Enter
.
4.
Select CD/DVD boot mode: Select UEFI Mode, if applicable and press
Enter
.
While the fil
es are being loaded from the disk, the Fujitsu logo screen appears
followed by a progr
ess bar at the bottom of the screen.
5.
Choose your language, if necessary.
6.
Three tool options appear: Diagnostics, Recovery and Utility. Select Recovery.
•
For Windows 8.1: Select Restore full hard drive
•
For Windows 7: Select Restoring the Factory Image (full hard drive recovery)
7.
Click Next to confirm full hard drive restoration. All data on HDD will be deleted.
8.
Agree to EULA by selecting Agree option and clicking Next.
9.
Click Next on the Recovery Disk Check screen to verify that the bootable
disk has been
inserted into the optical drive.
10.
The Checking for Recovery Disk screen appears followed by the prompt to insert the
first d
isk. Click OK to continue. Repeat this step for all disks. After all recovery disks
have been c
hecked and the check has been completed, click Next.
11.
Follow the prompt to reinsert the first recovery disk and click Next.
12.
Click OK when you receive the final warning informing you that all data on drive
C will be
lost. This starts the recovery process.
13.
Follow the prompts to insert the next recovery disks and click OK.
14.
After the copying of the image to the HDD completes the restore process is
complete, cl
ick Finish to restart the system. The computer will restart automatically
and then go
through the first boot process.
15.
Follow the steps listed in “Auto Installation support for essential access
software from bac
kup location” section.
key.
16.
Download FSDM (Fujitsu Software Download Manager) from support site and download
all the s
oftware applicable to the model and OS using FSDM.
17.
Follow the steps listed in “Auto Installation support for essential access
software dow
nloaded from support website.
Enter
110 Fujitsu