Technical data

Appendix
Recovery and Utility tools
Note: Recovery and Utility tools may not be available on your system depending
on the region f rom w hich the system was shipped.
Diagnostics tool: The Diagnostics tool is designed for use by IT professionals. It is not likely you
will need to use this tool. If you should need to use this tool, perform the following steps:
1. Press the Diagnostics Tool bu tton to start the Diagnostics tool.
2. Read the note, and then click OK.
3. Choose one or more of the following options for diagnostics on the F ujitsu Hardware Diagnostics
Tool window: CPU, Memory, Display, Hard Disk, CD/DVD/BD, Floppy Disk, Keyboard, and Mouse.
4. Click the Option button in the Tool menu t o specify how many times the tool
should run diagnostics on each selected component.
5. Press Execute to start the Diagnostics tool.
6. After the execution is completed, the selected components are circled in red to indicate th at they
have been diagnosed and the result dialog window opens. Click Close to close the window.
7. Click End to close the Diagnostics tool, and then click Yes to confirm the end of diagnostics session.
Recovery tool: The Recovery tool contains two options:
• Restore C Drive: Re stor e recovery image (only C: drive)
• Restore Full Hard Drive: Restore recovery image (full hard drive).
You can use these tools to restore the Recovery Image from t he hidden partition, and perform a full
hard drive recovery. Please refer to instructions a bove for details on how to create a Recovery Image.
Restore the Re
covery Image from Hidden Partition
1. Click [Restore C: drive] from Recovery and Utility tools
2. The progress
bar is followed by “Restore Recovery image (only C: driv e)” screen
confirming t
hat the Image will be restored to the C : drive. Click Next.
3. Read the instruction screen and select Agre e,thenclickNext.
4. Click OK to
acknowledge the warning message to restore recovery image to the C: drive.
5. When the progress bar appears, wait for the process to complete.
6. Click Fin
ish when the process completes; the c ompu ter will restart to W indows.
7. Follow th e s teps listed in the “Auto Installation support for software packages
from hidden partition” section.
8. Downloa
d FSDM (Fujitsu Software Download Manager) from the support site and download
all the
software applicable to the mod el and OS using F SDM.
9. Follow the s teps listed in “Auto Installation support for sof tware packages
downloaded from support website” section.
Fujitsu 97