Technical data
Appendix
Recovering Your Recovery Image Using Recovery and Utility
(for new hard drive or non-boot
able hard drive)
If you have installed a new hard drive or your hard d rive is not bootable, perform the following steps.
Note: You will need the B ootable disk and Recovery Image disk set for this recovery.
1. Power on y our system. When the Fujitsu logo appears on the screen, press the
Enter
key.
2. Insert the bootable disk in your DVD drive, then click OK.
3. Highlight the CD/DVD option from the Boot Menu and press
Enter
.
4. Select CD/DVD boot mode: Select UEFI Mode, if applicable and press
Enter
.
While the files are being loaded from the disk, the Fujitsu logo screen app ears
followed by a progress bar at the bottom o f the screen.
5. Choose your language, if necessary.
6. Three tool options appear: Diagnostics, Recovery and Utility. Select Re covery.
• For Windows 8.1: Select Restore full hard drive
• For Windows 7: Select Restoring the Factory Image (full hard drive recovery)
7. Click Next to confirm full hard drive restora tion. All data on HDD will be deleted.
8. Agree to EULA by selecting Agree option and clicking Next.
9. Click Next on the Recovery Disk Check screen to verify that the bootable
disk has been inserted into the optical d rive.
10. The Checking for Recovery Disk screen appears followed by the prompt to insert the
first disk. Click OK to continue. Repeat this step for all disks. After all recovery disks
have been checked an d the check has been completed, click Next.
11. Follow the prompt to reinsert the first r ecovery disk and click Next.
12. Click OK when you receive the fin al warning informing you that all data on drive
C will be lost. T his starts the recovery process.
13. Follow the prompts to inse rt the next recovery disks and click OK.
14. After the copying of the image to the H DD completes the restore process is
complete, c lick Finish to restart the system. The computer will restart automatically
and then go t hrough the firstbootprocess.
15. Follow the steps listed in “Auto Installation support for essential access
software from backup location” section.
16. Download FSDM (Fujitsu Software Download Manager) from sup port site and download
all the software applicable to the model and OS using FSDM.
17. Follow the steps listed in “Auto Installation support for essential access
software downloaded from support website.
Fujitsu 99