Technical data

Appendix
RECOVER YOUR SYSTEM WHEN THE HARD
DRIVE IS NOT BOOTABLE
Restore the Recovery Image for F ull Hard Drive
Follow the steps in the “Recovering your Recovery Image using Recovery and
Utility (for new hard drive or non-bootable hard drive)” section. You will need the
Bootable Disk an d the Recovery Disk Set for this task.
Utility tool: If applicable for you r region, the Utility tool contains two op tions:
Hard Disk Data Delete and Partition Creation.
The Hard Disk D ata Delete utility is used to delete all data on the hard disk
and preven t the data from being reused.
NOTE: Do not use the Hard Disk Data Delete utility unless you are absolutely certain
that you want to erase your entire hard disk, including all partitions.
To delete hard disk data:
1. Click the Hard Disk Data Delete button. The progress bar appears, followed by the EULA screen.
2. Agree to the EULA and click Next .
3. C hoose the hard disk from w hich t he data should be deleted in the list of hard disks and click Next.
The Partition Creation utility is used to change the C: and D: drive partition sizes.
To run this utility: (This is not an option when using Windows 7.)
1. Click the Partition Creation button.
2. A progress bar appears, followed by the EULA screen. Agree to the EULA.
3. O n the Recovery Tool - Partition Creation screen, move the s lider to set d isk size, and then click OK.
4. Click Yes in the Partition Creation confirmation dialog.
WARNING: It is highly recommended that you send your product to Fujitsu
Service to replace a hard drive. A mista ke c ould possibly destroy your
computer, your n ew hard drive or both.
98 Fujitsu