User guide

Chapter 5 Installation

> 5.2 Rack Installation

ETERNUS DX60/DX80/DX90 Disk storage system User Guide

P3AM-3042-06ENZ0

■ 2.5" type drive enclosure

• Use the thumb screw to fasten the front right of the drive enclosure to the rack.

• After attaching the supplied flange cover, use the thumb screw to fasten the front left of

the drive enclosure to the rack.

For details on how to attach the flange cover, refer to "3.4 Attaching and Removing the

Flange Cover" (page 78).

8 For 3.5" type drive enclosures, finish by replacing the front cover.

For details on how to attach the front cover, refer to "3.3 Attaching and Removing the Front

Cover" (page 75).

End of procedure

5.2.3 Installing AC Outlet Box (1U)

This section describes how to install the 1U AC outlet box in a rack.

(Rear rack pillars)

Thumb screw

CAUTION

o N

• AC outlet box cannot be connected to the device other than

ETERNUS DX60/DX80/DX90.