User guide

Chapter 3 Standard Operations

> 3.5 Turning the AUTO POWER Switch On/Off

ETERNUS DX60/DX80/DX90 Disk storage system User Guide

P3AM-3042-06ENZ0

3 Re-attach the front cover to the 3.5" type controller enclosure.

Re-attach the flange cover to the 2.5" type controller enclosure.

For details on how to attach the front cover, refer to "3.3 Attaching and Removing the Front

Cover" (page 75).

For details on how to attach the flange cover, refer to "3.4 Attaching and Removing the

Flange Cover" (page 78).

End of procedure

MPORTAN

• The AUTO POWER switch of the drive enclosure is turned to

"OFF" as the factory setting, and should not be turned to "ON".

• If AC power is being supplied, turning the AUTO POWER switch

of the controller enclosure to "ON" will cause the ETERNUS

DX60/DX80/DX90 to turn on.

• If the AUTO POWER switch of the controller enclosure is turned

to "ON", connecting the power cord to the outlet will cause the

ETERNUS DX60/DX80/DX90 to turn on.

AUTO POWER

switch