User guide

Chapter 8 Installing Optional Products

> 8.2 Drive Enclosure Installation

ETERNUS DX60/DX80/DX90 Disk storage system User Guide

199

P3AM-3042-06ENZ0

The screen that indicates a procedure for adding drive enclosures appears.

Figure 8.4 [Add Drive Enclosure] - Workflow Sequence screen 1

5 Connect the miniSAS cable (for drive enclosures).

Refer to "6.6 MiniSAS Cable Connection (For Drive Enclosures)" (page 117) for the

appropriate procedure.

6 Connect the drive enclosure’s power cord.

The drive enclosure turns on.

Refer to "6.7 Power Cord Connection" (page 123)

for the appropriate procedure.

7 Check that the drive enclosure's POWER LED and READY LED are on.

8 Click the [Next >] button.

The drive enclosure recognition process is performed. When the process completes, the

drive enclosure's AUTO POWER switch check procedure screen is displayed.

Drive enclosure