User guide

Chapter 8 Installing Optional Products

> 8.2 Drive Enclosure Installation

ETERNUS DX60/DX80/DX90 Disk storage system User Guide

198

P3AM-3042-06ENZ0

8.2.4 Additional Drive Enclosure Installation

This section describes how to install a drive enclosure for the ETERNUS DX60/DX80/DX90.

Procedure

1 First check that all the components of the ETERNUS DX60/DX80/DX90 are in

normal status, using the Storage System Status screen of GUI.

2 Wear a wrist strap.

For how to wear a wrist strap, refer to "3.6 Wearing the Wrist Strap" (page 81).

3 Click [Add Drive Enclosure] under the [Hardware Maintenance] menu on the

[Maintenance] tab in the GUI screen.

The [Add Drive Enclosure] initial screen appears.

4 Click the [Next >] button.

Figure 8.3 [Add Drive Enclosure] initial screen