User guide

Chapter 7 Setup
> 7.3 Advanced Copy Setup
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
167
Copyright 2010 FUJITSU LIMITED
P3AM-3042-06ENZ0
2 Check the contents of the notification E-mail.
Check that the [Serial number] (device serial number) that is described in the notification
E-mail is correct.
3 Write down the license key on the provided license label plate.
4 Attach the license label plate provided with the Advanced Copy Feature to the
rack rail near the ETERNUS DX60/DX80 which holds its license.
End of procedure
I
MPORTAN
T
Make sure to take a note of the displayed license key.
I
MPORTAN
T
If the serial number that is described in the notification E-mail is
wrong, contact your sales representative as soon as possible.
I
MPORTAN
T
Make sure to write down the license key.
Write the license key directly on an empty column of "License Key"
on the license label plate, or print the notification E-mail on paper, cut
out the part of the 16-digit numeric number of license key, and attach
it to the license label plate.
LicenseKey
Input column for the license key
License label plate
Release tie