User guide

Chapter 7 Setup
> 7.2 Basic Setup
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
159
Copyright 2010 FUJITSU LIMITED
P3AM-3042-06ENZ0
■ When the Host Affinity function is not used
Correspond the volume number to the LUN that can be recognized by the server for ports.
(1)Select the port and click the [Edit] button to change the setting.
Figure 7.21 [Define LUN Mapping] screen 1 (when the Host Affinity function is not
used)
(2)Change the setting as required, and click the [Set] button.
Figure 7.22 [Define LUN Mapping] screen 2 (when the Host Affinity function is not
used)
A confirmation screen appears.
(3)Click the [OK] button.
Returns to the screen of "Port List" in Step (1)
.
(4)Click the [Exit] button.
A message to confirm finishing the Configuration Wizard appears.