User guide

Chapter 7 Setup

> 7.2 Basic Setup

ETERNUS DX60/DX80/DX90 Disk storage system User Guide

140

P3AM-3042-06ENZ0

7.2.1 Initial Setup

Start Graphical User Interface (GUI) from the Web browser of the connected PC, and perform

the initial setup of the ETERNUS DX60/DX80/DX90 in the following order.

• Set Date and Time

• Set Storage System Name

• Change Password

• Modify FC Port Mode (Only for ETERNUS DX90)

• Set Port Parameters

• Setup Network Environment

The initial setup procedure is as follows: For the setup details, refer to "ETERNUS DX60/DX80/

DX90 Web GUI User Guide".

Procedure

1 Start the Initial Setup.

1-1 Start the Web browser on the PC.

1-2 Enter either of the following URLs in the address bar of the Web browser.

The logon screen of GUI appears.

Refer

"ETERNUS DX60/DX80/DX90 Web GUI User Guide"

http://192.168.1.1/

https://192.168.1.1/