User guide

Chapter 7 Setup

> 7.1 Setup Preparation

ETERNUS DX60/DX80/DX90 Disk storage system User Guide

138

P3AM-3042-06ENZ0

❏ Attaching the Network Settings label

Attach the completed Network Settings label on the label plate in the label holder on the rear

upper side.

Figure 7.1 Network Settings label attachment

■ Preparation and settings for the PC

The initial settings are performed by using a Web browser running on a LAN connected PC.

Prepare and set up the PC.

❏ Preparing the PC

Prepare the PC with the following settings and requirements.

- Web browser

Usable Web browsers are as follows. Using Web browsers other than the following is

possible, but proper operation cannot be guaranteed.

• Microsoft® Internet Explorer 6.0, 7.0, 8.0

• Mozilla Firefox™ 3.0.x, 3.5.x, 3.6.x

- Resolution

1024 × 768 or greater

Label holder

Network Settings label

Network Setting

: . . .

IP address of MNT port

IP address of FST

Subnet Mask

IP address of RMT port

Pull out the plate while holding the tag.

Tag

Plate

Refer

"ETERNUS DX60/DX80/DX90 Web GUI User Guide"