User guide

Chapter 6 Cable Connection
> 6.7 Power Cord Connection
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
124
Copyright 2010 FUJITSU LIMITED
P3AM-3042-06ENZ0
6.7.1 With No AC Outlet Box
The following explains how to connect the power cords when no AC outlet boxes are installed.
Two power cords (4m) are provided for each enclosure.
Procedure
1 Connect the power cords to the ETERNUS DX60/DX80/DX90.
1-1 Connect the power cord plugs to the power inlets of the Power Supply Units.
1-2 Attach the release tie to the plug of the power outlet for the power plug not to be
unplugged.
I
MPORTAN
T
To help with power cord management and prevent incorrect connections,
attach labels to the power cords and make a note of connection origins and
destinations.
I
MPORTAN
T
Each enclosure has two power supply units (PSU#0 and PSU#1).
The power cords must be connected to the inlets of both power
supply units.
PSU#1PSU#0
Inlet
Power cord plug
Release tie