User guide

Chapter 6 Cable Connection
> 6.6 MiniSAS Cable Connection (For Drive Enclosures)
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
118
Copyright 2010 FUJITSU LIMITED
P3AM-3042-06ENZ0
■ MiniSAS cable connection procedure
The following explains how to connect the miniSAS cable.
I
MPORTAN
T
• To help with miniSAS cable management and prevent incorrect
connections, attach labels to the miniSAS cables and make a note of
connection origins and destinations.
• When connecting miniSAS cables, always check the symbols on the
connector and port are matching.
- SAS (OUT) of CE or DE: Attach the connector with the symbol to
the port with the symbol.
- SAS (IN) of DE: Attach the connector with the symbol to the port
with the symbol.
• When connecting miniSAS cables, check the connector orientation and
then firmly push it all the way in.
When disconnecting miniSAS cables, use the pull-tab to extract the
connector.
Plug connecting to SAS (OUT) portSAS (OUT) port
Plug connecting to SAS (IN) port
SAS (IN) port
miniSAS cable
tab